Z1 Performance Custom Shift Boot 350Z

We are proud to announce the availability of a new product for us that we hope you enjoy. With JPM Coachworks, we are introducing our line of interior accessories designed to enhance your enjoyment of the 350Z.

Why a Shift Boot? Donít Other Guys Make Shift Boots?

The shiftboot is like the centerpiece in your car. When itís clean, and new, and fits well, the whole interior seems more modern, fresh and up to date. When itís dirty, sagging, wrinkled, cracked, everything around it seems tattered as well. We chose to start things off with a shift boot because itís quick to turn around, itís highly customizable (read more below), it fits like a glove, itís a cinch to install.

Do others make shift boots? Yep Ė but theirs arenít ours. What makes ours different? The materials (all of them), and the fact that they are made here in the USA. When you compare apples to apples, we think youíll find that there is no finer one available for your car.

What Materials Do You Use?

We offer 2 distinct materials Ė Genuine Italian Leather, and Genuine Alcantara

Leather:

Leather is something people are familiar with, but like anything else, there are different grades and qualities. Cheap stuff feels like plastic, has a very un natural shine to it, can get very brittle in a short amount of time, and doesnít tend to hold itís shape very well. The leathers we use are imported from Vicenza, Italy. The hides are full grain leather with even coloration throughout. Each hide features a supple soft hand and an impeccably smooth surface that makes it one of the most beautiful types of leather available. The finish is protected, making it suitable for automotive use. Additionally, the leathers we use are processed using low emission mineral tanning formulas which are environmentally friendly. Each hide is re-tanned in aged oak drums using vegetable agents, natural fat liquors and oils along with dyes that ensure the leather is properly through dyed. No PCP or CFC is used during the tanning process. A water-based finish is applied to provide an even coloration and protection to the leather.

Alcantara:

Alcantara is something most people are not familiar with. uses only genuine Alcantara and never works with substitutes. If youíre not familiar with this revolutionary material and its origins, letís go over the ins and outs as well as a few misconceptions that others in the industry have about it.
Alcantara was developed in the 1970s by Miyoshi Okamoto, a scientist working for the Japanese chemical company Toray. In 1972, a joint venture between Italian chemical company ENI and Toray formed Alcantara SpA in order to manufacture and distribute the material. Throughout the years, Alcantara has been popularized as a prestigious material for use in automobiles by being used in exotic marks such as Ferrari, Lamborghini, and Aston Martin as well as others. The soft, suede feel of the material leaves you with an experience of luxury and comfort that is unequaled by its competitors. Through its manufacturing process, Alcantara is afforded benefits that could never be achieved by actual suede. Unlike actual suede, Alcantara does not fade, is stain resistant, and will not bleed its colors among a number of things. Alcantara will not heat up like leather in the summer or cool down in the winter, making it the perfect solution for seating surfaces. Its unique texture also provides amazing grip that will keep you glued into your seat for track days or spirited driving. For these reasons, it is also a popular material for use on steering wheels.

Now that you know a little bit about Alcantara, letís go over a few misconceptions that are floating around the car interior world. First, you must understand that Alcantara is a particular material and trademarked name. It is not a generic term or label although some shops use it whenever describing similar materials. Ultrasuede is not Alcantara. Ultrasuede is in fact a close cousin of Alcantara and also a trademarked name by Toray Industries. Ultrasuede was invented about the same time as Alcantara using similar procedures so it has a similar look and feel as Alcantara. However, Ultrasuede is usually intended for use in other manners such as furniture, clothing, or interior styling and is not best suited for automotive use although it does make its way into show cars that are after a particular color that is not available in Alcantara. Ultrasuede is probably hurt the most by generic use of the term to describe suede like materials. Chances are if someone says they are using Ultrasuede, they are using a substitute. Be careful that you are not misled when someone is saying they have Ultrasuede or Alcantara and always ask for them to clarify that they are indeed talking about the actual products and not a competitor.

So whatís the big deal about using the genuine article? Toray Industries, as the pioneer of this material, has spent decades perfecting the material and the way it is able to be used. It is something that cannot be duplicated over the course of a few years or just by using a similar process. Weíve had a chance to see, feel, and test many of the competitors. The end result is that they just donít stack up. We understand that every application is unique and demands a different physical property so there are actually two variations to Alcantara. These variations allow us to use a super flexible version in heavily contoured areas and a more reinforced version for applications that should not stretch, such as seating surfaces. Most competitors offer one choice that does neither very well. Alcantaraís manufacturing process creates a very dense material that has an even soft finish to it. Almost every single competitor uses a weave pattern that exposes each row and is never as dense. For the few that might get close to the density of Alcantara, the softness of those materials fall extremely short. The history, technology, and quality of this amazing material is why we will use nothing but genuine Alcantara.

UV Protected Thread:

Something a lot of people overlook, but which makes or breaks the end result! We use a UV protected thread that ensures color-fastness, durability and long lasting appeal. Here is something that most shops cut corners on all the time. Just about every shop that does custom interior work settles for a cheap thin thread in any fiber they can get it in. Why do they do this? Well, to put it simply, it is very difficult to find a good selection of colors in a thread that is as thick as OEM applications and is made from a fade resistant polyester. We go out of our way to make sure weíre not only using a thick thread that will stand out, but we also make sure weíre not using subpar fibers that will fade over time. It may be a bit harder to work with and a lot harder to find the right colors but, we feel that the extra effort on our part makes for a superior product that we are proud to put our name on.

These are a custom order piece and ship in anywhere from 1-20 days depending on exact color choice, material avaiability and production schedules.

Color Choices:

Leather - black leather with your choice of red, blue or silver stitching
Alcantara - black Alcantara with your choice of red, blue or silver stitching

Custom colors are also available, contact us for details and pricing.




Item:
Price:
Shipping Cost:
Purchase:
Z1 Performance Custom Shift Boot 350Z- Alcantara (please choose red, black or blue stitching in comments section)
$85.00
$10.00
Z1 Performance Custom Shift Boot 350Z- Leather (please choose red, black or blue stitching in comments section)
$85.00
$10.00